Questions & Answers for: unpluging nic

NIC too close to USB port? I have a Dell Dimension 1100 with an onboard Intel Pro/100 VE network card. It stopped working after I plugged a Lexmark Z1300 printer into the USB port next to the ethernet

netowrk database issue Hi, We creat one database server and it is using nearer 150 users.Here the problem is the database server is disconnecting frecqently.If i unplug and plug from port againg it is

will not detect ethernet cord my desk top will not detect the ethernet cord ....how do i fix this on my own replace the cord or you may have a faulty nic card. this seems to happen to me quite a bit ...

NIC hardware failure Everything was working fine, then poof.....Network cable is unplugged error message. Swapped router ports, swapped network cables, everything points to the NIC. Is the NIC on this

Dell E6400 onboard NIC cannot get network connection - "A Cable Is Unplugged". The laptop is undocked with CAT5 cable firmly attached. I'd suggest updating the NIC driver in Device Manager. But, the ...

kyocera 3035 will not print - NIC card red LED flashing First turn the main Power Switch off, then unplug the network cable from the nic card and leave it unplugged. Then turn the machine back on, ...

Fixable problem or motherboard going out? I am teching on an ASUS P4V8X. The integrated nic is turned on and enabled and cabled properly to the modem, but says a cable is unplugged. I have swapped ...

I'm not sure what's wrong with my laptop, my HP tx1000. My computer is just not recognizing the adapter in the device manager. See if you can ping your NIC. Start -> Run Type in cmd In the command ...

wireless connections not showing up, how can i fix that? broadcom 802.1g If none of your connections are showing up your NIC might not be working. Trying shutting down your computer, unplugging it, ...

nic card not working? How to troubleshoot? Is there a plug and play nic card that can be installed onto this desktop PC? Hello Sqis, You can purchase any nic card which is compatible with WinXP or 7. ...