Question about ScanJet 3200C Flatbed Scanner
...the printer, it initilize but scanner of the printer goes one step forword and stops forever. Try unplugging the cord to the printer and wait a few seconds and re-plug the cord again , print what
Question about Scanjet 5470c Flatbed Scanner
HELP! My HP Scanjet5470C worked PERFECTLY - not anymore I unplugged my computer system & moved it into another room of my home. Now my computer won't even recognize it and my scanner won't even turn ...
Question about ScanJet 5300C Flatbed Scanner
...unplug the scanner's power ,you must also disconnect the USB cable from the computer. To resume use of the scanner, remove the power card, the the USB cable. Sounds like a lot but the order is ...
scanner still isn't found afterinstalling this driver and software update, please follow thedirections below: 2. Unplug the power cable from the 3200c ScanJet. 3. Unplug the parallel cable(s) from the
a message appears saying "scanner could not be initialized (scanner not found)" Try shut down pc,then unplug the scannner usb. Restart the pc and plug the scaner in and see if it finds it then.
Question about ScanJet 2200C Flatbed Scanner
...>properrties >compatability, select Windows XP (Servicepack 3)) then install with the scanner unplugged. After installation do the same (>properties >compatability, select Windows XP ...
Question about scanjet 3970 digital flatbed scanner
...scanner itself. Then unplug the power cord from the wall for the scanner. Wait about 20-30 seconds, then plug the scanner back into the wall. Now plug the cable in to the scanner, then the computer. ...
unplug the scanner from the PC and boot up your PC without any cables connected to the Scanner. Step2: Shutdown your PC and connect the cable once again and then see if this works. Option 2: Reinstall
...unplug the scanner cable from your pc then go to controll panel device manager then image adaptors right click unistall restart your pc then plug your scanner cable to your pc then install your ...
...on) although the carriage works. It will occasionally work if I unplug and re-plug it. it means the lamp does not work , try to restart the scanner , if still lamp off , it means faulty scanner ...
Usually answered in minutes!
244 Questions
109 Questions
80 Questions
73 Questions
80 Questions