Questions & Answers for: unplug print head

PRINT HEAD ERROR AFTER REFILLING ALL INK TANKS, I AM RECIEVING A MESSAGE SAYING THAT THE INCORRECT PRINTHEAD IS INSTALLED. PLEASE INSTALL CORRECT PRINTHEAD You can first try reseting your printer by ...

...print head. Unplug the printer. 1) Remove the 5 ink cartridges. 2) Lift the lever that is just to the left of where the ink cartridges sit. This is the print head lock level. 3) The print head is ...

print heads...nothing working Any help would be great! Some printer brands have a cute scheme that reads a "new" cartridge as good, but the refilled one has a small fuse link that is burned out by the

print. It is possible that when the ink was replaced there could be conflict with the software so unplug and reinstall the software then connect the printer and check. If the printer works but if this

print head. When the machine completes cleaning the print head, press Color(Colour) Start. Another Print Quality Check Sheet will print. Repeat the cleaning and the quality check process following the

...unplug it (2)Open the top and bring the ink cartridge holder to the middle (3)Raise the gray bar and remove the print head assembly with the cartridges in it (4) Lower the gray bar with the head ...

...print black. I've changed the cartridge twice. No result. Can the ink not be getting to the printer head? Unplug the printer for at least overnight. I have 3 of these printers and all 3 have done ...

...Unplug power, look down on printhead some have a chrome metal clamp that swings out and then you pull up on print head. Some models have two screws that hold print head in. Then the print head pulls ...

...then the ribbon cables need replacing or they are dirty at the heads. It could be just a case of unplugging them, clean them, then plug them back in