Question about KX-TH112 Phone
...it while your at it go ahead and take the battery out of the phone and let it set to Swap the AC adaptor from one of the handsets with the AC adaptor from the base unit-- this may fix the
...unit. If you have another handset that has its own charger than the power adapters are interchangable. try swapping them and see if this fixes your problem. Great solution to the problem. AC adaptor ...
...Adaptor back. 3. Once the base indicator lights come back on, release the Locator button. 4. After less than 5 seconds, hold down the LOCATOR button again until you get a long beep. After doing the ...
...unit was taken on trip and quit working while in use seems to have no power It's going to have to be serviced. Sounds like something is going on with the power supply. The AC adaptor could be bad. Do ...
...unit?s AC adaptor is plugged in. 4. Unplug the base unit?s AC adaptor to reset the unit. Reconnect the adaptor and try again. 5. The handset?s registration may have been canceled. Re-register the ...
...replacing the battery seems to solve the problem, but only for about 24 hours, and then the base unit is completely dead again. HELP!! Turns out the A/C adaptor was bad. Replaced it and all is
Question about KX-TH112S 2.4 GHz Cordless Phone
...adaptor for the base unit with one of the adaptors hooked up to the handsets. I don't want to give up my phone yet because I can't find anything anything similar from any manufacturer, with two lines ...
...adaptor from the base unit to try to charge the battery. This did not work. Charging notice did not appear in the display window and the charge indicator light does not light up when I place the ...
...stopped working it says no link to base. reconnect ac adaptor can you help plz sounds like battery is flat. Put phone on main unit and make sure the main units power cord is plugged in and turned
Question about Technics Stereo Receiver Sa-828
adaptor", or is it a complete no-go? I will not buy the item until I'm a little wiser! Many thanks, Stephen. If your unit cannot operate in voltage range 110 to 240 then best leave it where it is. Our
Usually answered in minutes!
1,197 Questions
619 Questions
465 Questions
463 Questions
293 Questions