...Unavailable (Handset Only) To clear the base registration data in the handset, please follow these steps: Press and hold [] and [#] for more than 5 seconds. Select the BASE UNAVAILABLE submenu. BASE ...
Question about TCX905 Cordless Accessory Handset and Charger Phone
...handset Hello. I have a Uniden TRU9466 base and I cannot seem to register my tru9465-2 model handset to it. I was told that both the bases use the same model handsets and are interchangeable. I've ...
...handset works but the other one says unavailable what should I do? I put the phone on the master handset (I registered it) i have a total of three cordless phone including bases.the main phone is ...
Question about DECT 6.0 Cordless Telephone Expansion Handset
...Handset" and under that "Base Unavailable" Select Base unavailable. The LCD should now say "Handset not registered, place in base" Just set it in the charging cradle on the base unit and it should ...
uniden dect 6.0 display reads searching I have tried everything I know to try to get my handsets to start working again and nothing solves the problem. Any ideas? Hi there, try this. Press and hold th
Question about DECT 6.0 Cordless Telephone Expansion Handset
Uniden Dect1480 6months old Unable to access the phone book, says its unavailable, as well as the cid, also says unavailable Unplug the base (the power cord) wait a few seconds and re-plug it in - it ...
...Uniden 1560-3 has out of range on all handsets but one. I only have a dial tone on one handset. Please advise how I can correct this problem Reset the hand sets that are out of range by doing the ...
uniden xdect 8055 pairing phones 'Searching' is appearing on both handsets display. Phone base can make and take calls when plugged in to the phone line but handsets not pairing Xdect ...
Question about DECT 6.0 Cordless Telephone Expansion Handset
...'Menu' button). Do it again, but select "base unavailable". After that, set them in the base (not the handset charger) and they should register with the base. This works on most Uniden model
Question about DECT 6.0 Cordless Telephone Expansion Handset
...handset. This worked for my UNIDEN TRU-9480-2 SOLUTION: 1) Remove handset from base 2) Remove power cord from back of base 3) Press and hold the [find hs] button on base as you plug the power supply ...
Usually answered in minutes!
3,453 Questions
1,326 Questions
1,157 Questions
1,197 Questions
607 Questions
