Unbalanced The dryer seems to have a thumping sound like there is something in it but nothing is. Is there a balancing that I might be able to fix? Let me know David Snyder [email protected] David.
...where the belt was frayed or about to go make the noise you describe. I don't think it is the rear bearing, but the front glides, or bearings could be going out causing the dryer to run
...drum)" and then stops and hums. get a new drumm it might be bent if your putting stuff that weight alot in your dryer if its making a skeeking rusing soung get a new drum about 400 ...
...dryer sounds like an unbalanced washer. Sound is coming from the front top left side. Machine diesn't move. does it even when empty. Began after was on for about 10 minutes. Possible bad bearing for ...
...large load was placed in the dryer. Could this have unbalanced the drum? replace the drums belt and idler pulley.. the pulleys bearing is at fault and the belt will be stretched now from ...
Question about 400 6942 Dryer
...dryer started making load noise when motor is running Hello - Is it a rubbing or thumping noise? If so, it sounds like the tub could possibly be unbalanced from either a bearing/pulley suspension ...
Dryer was running, started squealing, then stopped spinning. Can't even spin it by hand. I'm guessing a belt broke but how do I get to it and fix it? Hello Hannah Kottman - Sounds like
Dryer is making loud noise when drying. Listen to video. Help I heard the sound and that is not an unbalanced drum. I think you have either bearings going out or your drum belt needs to be replaced. ...
Question about Cabrio 7.0 Cu. Ft. Super Capacity Plus Electric Dryer
My washer always gets unbalanced load with 7 minutes remaining. When left on the default settings, my washer will always go to "UL" with 7 minutes remaining. I can sometimes circumvent this by putting
Question about Cabrio 7.0 Cu. Ft. Super Capacity Plus Electric Dryer
in tub from last load that did not drain. Sounds like you washer is trying to spin out and becoming unbalanced and cutting off.. Move timer to spin and see if water spins out. If so try running a load
Usually answered in minutes!
1,743 Questions
1,329 Questions
1,410 Questions
1,123 Questions
940 Questions