Questions & Answers for: Malber unbalanced during spin

Question about WD1000 Front Load Washer/Dryer

1 Answer

during the last normal spin the drum load was heavily unbalanced and spun violently then stopped and did the slow rolling. Since then the washer gets stuck for ever on the slow spin cycle. The belt is

Ad

...during the whole cycle but no spin so i normally put this machine into orange spin cycle twice to make sure that the cleaning products wont still be on the clothes. i saw the button extra rinse so i ...

Ad

Question about P21 Front Load Washer

2 Answers

...during the spin cycle. Additionally, the door gasket had a "wrinkled" appearance. After taking various panels off of the machine, I discovered the culprit. The insides of the machine (drum, etc), are ...

Question about WD1000 Front Load Washer/Dryer

1 Answer

...that problem, but is it possible that the machine becomes unbalanced with the spinning load and then aborts the spin, so it doesn't finish? Has the machine been properly leveled during

Question about WD1000 Front Load Washer/Dryer

1 Answer

...during the spin cycle soapy water is leaking out somewhere close to the front right of the machine. I checked the hoses and could not find any holes or loose connections. This does not happen every ...

Question about WD1000 Front Load Washer/Dryer

1 Answer

...during any cycle I use but just that the drum does not spin/move to wash, rinse etc. Belt looks fine too. Please can I get a solution for this. Thank you I had similar problem recently. It turned out ...

Question about WD1000 Front Load Washer/Dryer

1 Answer

...during the spin cycle. Call a qualified appliance repair technician. It spins only with the lid closed For safety, washing machines are made so that they spin only with the lid closed. The lid switch ...

Question about P25 Front Load Washer

1 Answer

...debris. Replace the filter and close the pump access door. Rearrange the clothing in the load. An unbalanced load can prevent the washer from spinning or draining. Allow the washer to cool down for ...

Question about WD1000 Front Load Washer/Dryer

1 Answer

Excessive vibration during spinning I have the Malber WD-1000 and it seems to vibrate a lot to the point where it physically moves around and seems to stop and reset itself when it spins. Wash cycles ...

Question about WD1000 Front Load Washer/Dryer

1 Answer

...during a normal light wash load. While in the final high speed spin cycle, it sounds like someone is hitting the machine with a hammer ! The other short term spin cycles sound mormal. Go figure? ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Malber Washing Machine Experts

Cindy Wells

Level 3 Expert

6688 Answers

vince

Level 3 Expert

2530 Answers

john h

Level 3 Expert

29494 Answers

Are you a Malber Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...