Questions & Answers for: Tascam unbalanced

...(or online) that converts the Stereo Mini (1/8") male connector into two 1/4" male connectors (unbalanced). These can be plugged into the front of the DP-01FX into the 1/4" plugs (where the ...

No Audio I have the unbalanced output hooked up to a home receiver. I am getting no sound out the mixer at all. I have no manual and need help. The audio works fine when I hook my computer up to the ...

...might become confusing. Each line in is also a TRS jack. That means that using a common guitar or unbalanced cable will make the jack act as an input. If you use a shielded !/4" stereo cable(

Connecting aux send on Tscam 2488 to input of TC Voiceworks The aux sends on the 2488 are unbalanced and the line input on the Voiceworks is balanced. Which jack plugs do I use? Mono or stereo? I have

...8-Track Portastudio, here are some of the specs: Analog specifications Inputs (A And B) 1/4" Phone (Unbalanced) Input Impedance: > 10k Ohms (Max), Or 1 M Ohms (A Only) With Switch In Guitar ...

...16 tracks can be recorded simultaneously, via eight XLR balanced inputs and eith 1/4-inch unbalanced inputs. There are several high-quality built-in effects, such as reverb, delay, ...

...boards. So what you need to do is take the RCA outputs from your source and hook them to a IHF or unbalanced to Balanced converter and they are available from MCM Electronics. This device here ...