Questions & Answers for: Suzuki Sidekick types of damage

Motor g16A 16V, Borken cam belt, has it bent the valves ? Broken cam, has it bent the valves Hi, there is a posibility that it may have bent valves, install new belt ,if your engine misfire or dont ...

Ad

Question about 1990 Sidekick

1 Answer

4x4 wheel hub locks is it safe to keep the hub locks in a lock position fulltime It is not advisable to keep the hub locks engaged full time,,because it can cause premature wear,,or even ...

Ad

Question about 1992 Sidekick

1 Answer

timing belt blew , wiil ths bend valves or damage anything It doesn't always have to especially on a 4 cylinder, but it is possible. However, if it did you are looking at a very expensive repair ...

We have a 1994 Suzuki Side kick in for work and the timing belt broke on it. We would like to know if the valves bend when this happens. nearly or perhaps all of the suzuki side kick engines are ...

will not start without starter fluid, runs fine after starting with fluid Hi, Starter fluid? if u kept using that starter fluid cleaner, it might damage the rotor winding! Better go to ur garage and ...

Question about 1994 Sidekick

1 Answer

water in oil after a damage block change water still gets into my oil If water is still mixing with your oil then that means that you have a cracked head, worped head, blown head gasket or your block ...

...damage is felt as a vibration in only one direction (i.e. either horizontally or vertically). 5 Test steering. When trying to enter a corner with approximately 30 km/h (15 mph) there shouldn't be any ...

96 sidekick gear engaged only on 4x4 but when I put it on 4x2 all gear wont work do not use 4wd on dry pavement, ever. it's only for show or ice, or off road. never day pavement. if you persist i this

Question about 1998 Sidekick

2 Answers

What is causing engine spark knock? spark knock when given gas Are you using lower grade gasoline than what is recommended? If it is an older car, you require the recommended gas octane type. In newer

does it have a clutch slave cylinder? if so where & how do you bleed it 1.6L L40HC 16V check the reservoir for fluid, located under the bonnet on the fire wall, the slave cylinder is located on the ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...