Questions & Answers for: tv tube hold electrical charge

Ad

Question about PV-C2010 20 in. TV/VCR Combo

13 Answers

...TV tube? Is there a proper way of discharging the TV to make it safe to work on and remove the main board (not the tube board)? I can see exposed metal wires going across the tube, but the tube does ...

Ad

Question about 324250WN 28" TV

1 Answer

...TV is only a year and a half old. I've tried the colour program setting and turning it off at the mains etc. Thanking you in antcipation. Nemi Sounds like the picture tube has got itself magnetised. ...

Ad

Question about DVD142RC 14 in. TV/DVD Combo

1 Answer

tv to start up or video semms to de no power to nain unit The safe way to quickly check. UNplug unit from wall. Place a screw driver or any metal blade IN BETWEEN blades and hold for one second or two

Question about DVD142RC 14 in. TV/DVD Combo

1 Answer

...tube i have, or replace it and then recalibrate my tv. Is there a cheaper solution? can i just buy the part and plug it in? If you have had the set diagnosed by a technician, $500.00 for a picture ...

Question about KP-46WT520 46" Rear Projection HDTV-Ready Television

1 Answer

hold the power button the TV comes on with sound but once again with no picture and then clicks back off...I'm using Directv and have been for several years. Any ideas Your symptom is that you have no

Question about KP-46WT520 46" Rear Projection HDTV-Ready Television

2 Answers

tv unplugged, locate (by vision only) the thick red wire with a suction cup attached to the top rear of the tube. that's the anode wire. under that suction cup is the metal part of the wire that gives

Question about P60921 60" Rear Projection Television

1 Answer

...TV's then you should call an expert. If you are comfortable, then read on. It has been my experience with older rear projectors that the solder joints on the main board become cracked over time. If ...

Question about D52W20 52" Rear Projection HDTV-Ready Television

1 Answer

...TV turns on then turns off. It has been my experience with older rear projectors that the solder joints on the main board become cracked over time. If you have a set that shuts down after warming up, ...

Question about WS-65809 65" Rear Projection Television

1 Answer

...TV's then you should call an expert. If you are comfortable, then read on. It has been my experience with older rear projectors that the solder joints on the main board become cracked over time. If ...

...tv and see if it blew the fuse but watch out for the flyback anoid it still holds power if you don't know what that is it the thick red wire that plugs into yhe tube so DON'T UNPLUG IT FROM ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76204 Answers

Cindy Wells

Level 3 Expert

6068 Answers

Marvin
Marvin

Level 3 Expert

85222 Answers

Are you a Televison & Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...