Questions & Answers for: tv stays channel 60

The television I have the screen is right one moment and then the next it will shrink down and if you leave it on the channel for a little while it will stay normal and sometimes shrink down but if ...

...stays on channel 2. I am trying to connect to the Dish network (second tv). Do I have to buy a universal remote? Thanks. gregg Gregg, If this is a replacement TV I would say you are probably better ...

On the Library section of the DT16300 I have approx 8.5 hours of saved programmes yet the display says there is only 18% of disc space left! out of 60 hours recording time?. After Re-loading the ...

...another 10 to 15 mins i find put a tv guide channel on the screen stays pretty much the same picture, then leave the TV on" i use a 4 hour rule if i dont view in 4 hours or more i will close tv ...

...TV is on channel 60, make sure the remote is in SAT mode and tryto go to different channels and make sure it stays on the satellite channels.If you have any questions please e-mail me at ...

...TV, VCR, etc.). The red indicator blinks, then stays lit. Enter the 4 digit code from the code tables. Note: after a valid code entry, the red indicator turns off. For an invalid code, the red ...

...TV, VCR, etc.). The red indicator blinks, then stays lit. Enter the 4 digit code from the code tables. Note: after a valid code entry, the red indicator turns off. For an invalid code, the red ...

...TV that I replaced had to be on channel 73, the Insignia either goes to 3 or 60 what can I do to get it to stay on channel 73? Check its signal input cable connections. There shouldn't be any other ...

...tv, it asked for an update but now it's only showing the Sharp logo and stays on for 3 mins goes off and powers up to show the sharp logo again, nothing seems to work Tried the volume and channel ...

I want to switch it to cable channel 03 but it stays at 64 you have to switch the input to cable .