...TV TECH AND AM WORKING ON MODEL LT2722 IT HAS NO POWER LED DONT LITE UP I CHECK POWER BOARD , IT LOOKS OK TO ME CAN YOU HELP hi change ic surface mounted u405 on back of signal board Thanks for the ...
Question about LT-3222 32 in. LCD Television
TV then starts and runs once this signal is removed, the diagnosis is confirmed. This is risky - you can blow things up if not careful. BE CAREFUL WHEN HANDLING , IF YOU DON'T KNOWLEDGE OF ELECTRONICS
Question about Norcent Technologies2703 27" TV
...tv receives a signal with a resolution higher than it can display. Connect your DirectTV to another tv and make sure that the signal is one supported by your tv (any SD format will do). If it is then ...
Question about LT-2023 20 in. EDTV-Ready LCD Television
...tv"s digital signal processor, and is programmable from your tv"s settings menu. I would advise you read the manual concerning these settings if you have one, or download one, as it can get ...
I can't get the back of the TV off to check. Is there a Norcent Service Center near zip code 90503? It is probably just a loose aerial or signal lead. See about replaceing or checking the leads first
...tv with computer with a vga cable, but I get a "no signal input" memo on the screen vhen I try to set the source. What do I need to do? you need to set the computer to display on another ...
...time. Last for a few minutes or so long that we give up and turn off the tv for a awhile. if this keeps on happening its a signal of the main board going bad and / or the screen going bad on the
...are able to receive DTV free air digital signal broadcating from with a good roof or a good digital antena,99.9% tv broadcasting tv signals in the world are now broadcasting in digital tv signal
Question about LT-3250/LT-3251 32 in. LCD Television
...tv Tuner signal board it is shorted and dead.That the board where the tv incomming broadcasting signal cable plug into it.U have some basic mechanical skills like take things aparts and putting it ...
Question about LT-2722 27 in. LCD Television
tv turns on and is looking for signal then turns off after about a minute if the indicator turns to red you possibly have power supply problem,,If the indicator is green and have sounds you have t-con
Usually answered in minutes!
47 Questions
30 Questions
27 Questions
25 Questions