Questions & Answers for: tv screen shows grey flashes

...TV is fine but when I put in a tape instead of playing it goes straight to grey fuzz on the screen, the VCR seems to turn itself off because you don't get response to any buttons being pushed and the ...

screen didn't come up, instead I got the grey fuzz flashing then the system shut itself off. Any ideas? The only thing new I've noticed are advertisements in the guide, maybe it's a programming thing.

...by removing a small cover on the frontof the console. This will reset the machine and you shouldstart to see th cursor in the tv screen. Repeat this if necessaryand you should be on your way. Good ...

...tv and it turned on but instead of getting anythings. it just flashed colors,red to green,to blue to yellow to white to grey etc to row i could not change any inputs or get the menu to show up. it ...

shows a grey screen, makes a popping sound then the picture turns black and the light flashes yellow and green. Your sustainer board is probably bad. You need to get the Y & Z sustainer boards replace

...is switched off. Please give me a hint. Thank you very much. motherboard needs replaced, to test take a flashlight TV on and shine on screen from above at an angle, do you see a faint image, replace ...

...screen would go all grey, like the "snow" that shows up on tv's when its not connected to the satellite. but if i would turn it on and off after a while it would eventually turn on and work ...

...screen tv was working perfectly fine last night, i turned it off last night at around 3am...and then when i turned it on today, it wasnt working, i either would get a flashing black screen or a grey ...

...screen is grey (after phillips power-up logo shows) when plugged in, will not power off, remote led blinks when used, but no change. Have to unplug it to power it off. Prevously, when the sound was ...

...screen flashing, until HDMI cable removed. Took the back off the TV, checked the fuse is OK, took a photo Available. Re-assembled - same fault, I have not added any new faults. Will work on power ...