New oven thermostat acting nuts I just replaced the thermostat oven control on a GE JBS07m1bb Range. I set the oven to 300 deg. and when it reaches that the oven light on the control board goes out. ...
Question about JASAV22730 Freeview DTV Receiver
we have an older model tv and can't figure out how to get the channels to above 69 Channels 2 to 69 are over the air - Antenna - channels. Channels 2 to 125 (some duplication) are Cable channels. ...
work. Thank You, Chris. These are output settings for when you want to connect the camera to a tv. If you were connected to a tv, when your screen goes blank, the picture would appear on the tv screen
Question about JASAV22730 Freeview DTV Receiver
we replaced our hot water tank a month ago and now we have a rotten egg smell and black junk coming out of our taps. Looks like black sand and now the water is looking grey, this problem seems to be ...
...opens and on back sceen get 720 and 1080 message and it goes no further. I can't figure it out. Do you have it in picture taking mode or review mode? 720 and 1080 refer to resolutions on a
I have a timer hooked up to operate my outdoor landscape lights so that they come on around dusk and turn off at 11 pm or so. The "on" tripper which is white clicks as the timer rotates past
...goes in a little than tries to go out and it makes this weird loud clicking noise and i cant see a screen and when it is stuck in this spot it wont turn off without taking the batteries out. I think ...
Question about RC24912-E Universal Remote
how to turn off the PSM in BPL TV if the remote is not working my tv actual remote is not workn................ can i turn off the PSM by using TV or Dish TV remort as i got a dish connection to my TV
...tv its a flat screen with built in dvd player 028,027,022,013,017,000 are the codes to check. If you wish to get more setup codes, three digits, four digits or five digit ones, check this link. Pull ...
Question about GE 24-Hour Timer, 2-Pin #15004
On the model TP24-BQ there are grey pins and white pins. I cannot remember which way each should be pointing to set the timer correctly. On the following site you should find your timer and ...
Usually answered in minutes!
2 Questions
4 Questions
2 Questions
9 Questions