...tv powers up ok but Element 26 model ELCHS 261. The powers up ok but the screen goes dark after ELEMENT logo is displayed.The picture is visible if connected to an outside monitor. The sound is good ...
...tv on the picture is great but after about a minute the screen goes black but the sound continues. If I turn it off the picture returns as normal but then again after a minute or two the screen goes ...
Question about FLX-3211B 32 in. LCD HDTV
...screen like,tv, hdmi,1 exc.then with in secounds it goes to a black screen it will not let medo anything unless i turn off and does the same thing i need help whats wrong with my tv thanks You have a ...
screen and I still have my sound. I turned the tv off wait about 5 min turn it back on the picture come on then turns to a black screen again. The longest it stays on is when I first turn it on, after
...tv, the screen turns dark grey. It normally cuts on and says Element Electronics then it goes to whatever channel I was watching, before I cut it off. Now my tv doesn't show the logo at all and ...
...TV (ELDFT321 on inst. manual) Sreen repeatly goes silent & orange, must turn off & on to restore screen. Is there a cure for this ? What exactly do you mean by goes silent? Does the screen ...
Question about 26 in. LCD TV
tv will power up but screen goes to blue. Have gone through all the troubleshooting. Still blue screen please give suggestions on how to resolve the problem. check your inputs looks to me there are no
...screen but audio excellent tv is four years old frm hh greg/grey panel....tv blinks and will hw for a little while then black out. There are some common reasons for this fault to Plasma displays. ...
Question about PLX4202B 42 in. Plasma TV
...5mins my element tv works for 10mins then shuts off,or it goes for 5mins then the screen goes black ang i have to restart the tv.then it does it again. Power supply Caps. Have someone replace
Question about FLX3711B 37 in. LCD TV
...screen. If you can see movement then the inverter board needs replacing. If you can't see any movement then the T-Con board is bad. You can get parts from here: TV Parts Universal TV Stands DLP Chips ...
Usually answered in minutes!
194 Questions
156 Questions
51 Questions
56 Questions
53 Questions