DISH DVR 625. How do I individually assign tv1 and tv2 for recording You can accomplish this by either going to the specific TV and selecting the record option at the time the program is about to come
...tv1 will not get siganl, but tv2 works fine,,,and this goes on n on...any ideas......phone cant figure it out One of the inputs on the back of the 322 box is bad. usaly 1 wire runs from the dish into ...
...!! For this also, you will want to be at TV1, in the system info screen. Menu twice with TV1 remote. :) http://www.dishnetwork.com/SupportSection/remote-setup Becki Barned DISH Network Customer ...
Question about DVR-625 DTV Receiver / 100-Hours Video Recorder
DISH Network here. The default setting in our receivers are to automatically record everything onto TV2. You can change the setting by pressing menu-8- 5 (preferences-record plus), then you can either
Question about ViP722 DTV Receiver / 350-Hours Video Recorder
...TV1. You can swap between the tuners by pressing "Input" button while in SAT mode. This should get things set up the way you want it. Thanks for choosing DISH Network! Phillip Chang DISH Network ...
Question about ViP722 DTV Receiver / 350-Hours Video Recorder
...able to watch what you record. But you can set your recording to TV1, and then put the receiver into single mode, and switch from the recording to live TV. Becki Barned DISH Network Customer ...
...DISH Network and I was going over yourpost and with TV2 showing what's on TV1 you want to make sure the receiver isin dual mode and if that is the case please unplug the receiver for 10 secondsto ...
...DISH Network and I see your TV2 changes TV1 as well, thereis an easy fix to this problem. You will want to make sure the receiver is inDual Mode and then make sure the TV2 connection on the back of ...
Dish Network TV1 remote doesn't work with new TV I have a new LG LCD TV and the TV1 remote no longer works. If I order a new 21.0 IR/UHF remote, will I be able to program it for the family room ...
Question about Dish Network Dish 500 Antenna Satellite Package with Pansat 4500 FTA Reciever - D4500
...for TV1 and TV2 are being sent. Go to TV2, and with the tv remote (not the DISH remote) change the channel to the one shown on the screen (usually channel 60 or 73). Then dance because you fixed
Usually answered in minutes!
2,410 Questions
2,254 Questions
1,646 Questions
1,423 Questions
1,438 Questions
