Questions & Answers for: turntable speed


Question about PS-LX250 Turntable

1 Answer

Turntable speed The turntable will only play at 45rpm. The speed button seems to function correctly but regardless of the position I can only get the 45rpm speed. most of these were belt driven, if ...


Question about iTTUSB Turntable

3 Answers

turntable speed problems I have an Ion Turntable that has two speeds, 33 and 45 rpm. I have everything working perfectly except that the speeds are way too fast. 33 spins like 45 and 45 spins like 72.


...TURNTABLE SPEED PROBLEMS:- HOW CAN I ADJUST THE TURNTABLE SPEED ? THE RECORDS SPIN OVER-SPEED SLIGHTLY if you open the bottom,there is variable potentiometers for the speed need a ...

...Vintage Zenith Turntable with 5 record changer wants to start records in the middle. Check the speed it is set at as the speed setting tells the turntable what diameter of record it will be

...turntable plays too fast even when the pitch fader is at the slowest speed change the motor is on bad conditions You need to calibrate your pitch control. This requires a small precision screwdriver ...

Question about T.50 Turntable

2 Answers

speed on my turntable. they sound more like a 30 speed, what do I do Hello Rosie, Some turntables have a pitch adjustment feature which allows you to speed up or slow down your records. The adjustment

...speed presets under the turntable or on a PC board inside the deck. Or on the motor itself. However this only applies to a belt driven type. A direct drive will have an electronic part fault on it to ...

...speed of your turntable, remove the record, the mat again & locking the turntable arm, replace the screw holding the speed-controller circuit in place (as per Step 2) and then finally replace the ...

...speed of a Sony LX250H turntable? The answer is not in my manual. Presumably you mean correcting the speed to play 45 and 33 correctly? Some turntables have the speed control(s) as a preset(s) built ...

speed of your turntable is governed by an electronic circuit and this is where the trouble is. The cost of a repair is going to be mostly labor which may exceed the value of the value of the turntable

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Audio Players & Recorders Experts

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers


Level 3 Expert

5700 Answers

The Knight
The Knight

Level 3 Expert

76416 Answers

Are you an Audio Players & Recorders Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides