Questions & Answers for: turntable needle moves

needle n53 it plays ok this is linear tracking turntable kenwood KD-9XB I BOUGHT USED no book they didnot have this turntable on the list but i wrote it down here kenwood kd-9xb The tonearm lift is no

needle doesn't come over. There are some gears which move back and forth under the turntable which link to the plated Sometimes they just get stuck, sometimes just reseting them will resolve the issue

...turntable does not move. I installed a new belt, but it still doesn't move. Played fine before! Check the mechanics and the internal circuit , it is in errors state. http://www.turntablebasics.com/ ...

...the records will skip. Find a different place for the turntable or don't walk around. In severe cases, raise the weight to 1.75 to 2 grams, but this wears the needle fast an can cause

...needle stay down on my record The turntable might need some maintenance - sometimes the mechanical parts will freeze due to dried up lubrication. The arm which guides the needle may be stuck in a ...

turntable. Please make 100% certain the needle is still in place... To test this  *GENTLY* rub your fingertip over it and you should hear noise from the speakers when you do.  If there is NO

needle replacement Turntale spins but the needle stays in the same place and no sound comes out of the speakers any ideas MOVE THE WEIGHT FORWARDS ON THE BACK OF THE TONE ARM.....IT TWISSTES

...turntable level. It is very important that it is level as a tilt can lead to the head "skipping", amongst other things. You can get a full User Guide here ...

...turntable Technics website may have one. The counter weight has a setscrew on it. Loosen it ans move the weight slightly forward until the needle just rests completely in the groove and stays there. ...

...turntable needle arm My aiwalx 70 turntable is not working. I can power it up, and when i press the start/cut button the platform rotates, but the needle arm does not move to play the . Aiwa fusing ...