Questions & Answers for: Poulan turning cap

needs carburator adjustment for poulan model # FL 26 Will not turn over, been fairly hard to start since i purchased, company said it needs an adjustment but wants to charge me, says it is internal, ...

I have the same gas cap problem? Mine just started doing the same thing. Gas cap used to be easy to get on and off, and now binds. Oil didn't help. Also, It now leaks badly out the vent hole in the ...

spool cap struck i tried both directions to get the end off to respool with string and it is stuck what do i do Well you are going to have to cut off the cap off the get to the bolt head inside the ...

...turning the cap. It doesn't go on straight and is hard to take back off. It only turns so far once I do get it on straight. Sounds to me like either the cap or the neck it screws onto is warped or ...

how do you get the damn cap on the gasoline tank it is imlpossible to get it started and i use the tool that came with the saw and it is impossible to turn the cap correctly.... HOW DO I LINE THE CAP ...

The gas cap can only be removed or tightened with pliers. What can I do to fix this problem? If you are using gas with ethanol mix in it ...the ethanol is causing the plastic to swell. Set the cap in ...

case. Use the screw driver as a lever to keep the drum from turning and back out the cap screw counter clockwise. If the drum clutch becomes out of round you will have to replace it (part # 530036665)

PE 550 Poulan weed eater edger. Replaced gas tank that came with new gas lines and gas cap. Runs on full choke but not off of full choke. Also noticed it will run okay with gas cap off. When you ...

poulan pro pp125 on/off switch poulan pro pp125 my weed wacker would not turn off. The on/off switch seems to be broken. Frustrated, I pulled off the spark plug cap and that shocked the hell out of me

i am having issues removing my oil cap on my bolens 21" push mower. Any ideas? Brand new. Oil tank has a yellow cap with a slot in it, but won't turn. Wondering if I am missing a part. try useing a ...