Question about Decora Light Dimmer Switch
...single pole dimmer switch. Connect the green wire to the ground wire in your electrical switch box and connect one black wire to the power (common wire) in the switch box and the other to the wire ...
Question about 104-05611-2WS 15A Decora Single Pole Illuminated Switch with Ground
...turn the power on both circuits are hot my question is that the switch runs hot in off position and when i turned the power on and flipped the switch it blew the breaker does the switch need to be ...
Question about COMBINATION SINGLE POLE TOGGLE SWITCH
...single wire to this junction twisting all three together, put a wirenut on the junction, and re-attach to switch. once this is done, you should be able to turn the breaker back on. If the above ...
Question about COMBINATION SINGLE POLE TOGGLE SWITCH
turn power off to lights. If the product is as pictured, (two single pole switches in the space of a single switch), then it probably has 4 terminal screws (in addition to the ground). Look closely at
...single-pole switch, here are testing & wiring instructions for Leviton timer. Remove device and separate wires for testing. Use ordinary two wire tester. Tape tester leads to wood sticks so hands ...
Question about Illuminated Slide Dimmer 832-6631-w White
...single pole and not a 3-way. What could the problem be as I have tried it in three places with the same result. I added 4 dimmers in bedrooms 3 months ago with no problem. Sounds like that dimmer you ...
...single switch, and a duplex outlet with a matching plate. Your hardest part will be to decide the color of the devices and plate (rectangular, double-D holes, etc. I'd suggest, that for "preserving ...
Question about Timer Switch 5-10-15-30 Minutes, 4 Buttons and OFF, Single Pole, Li
...Single pole switch has two insulated wires. Remove both insulated wires from switch. Timer black connects to one of the insulated switch wires, or to Hot wire from breaker Timer red connects to the ...
...single pole switch has two black wires. One black wire is Hot from breaker, and the other black wire goes to Load. Turn power on, and test each black wire to bare copper wire. Tester lights up on Hot ...
how to replace a doubble lightswitch Easy way.. TURN OF POWER. pull the switch with the wires still attached from the electrical box. Take off one wire at a time from the old switch and place it on ...
Usually answered in minutes!
55 Questions
32 Questions
32 Questions
23 Questions
19 Questions