...turn signal switch replace turn signal and wiper switch on steering shaft Check your local library for a Chilton or Haynes repair manual (mine has lots for older Chevys)....if the repair is anything ...
...TURN SIGNAL. IT WORKS SOMETIMES, AND OTHER TIMES IT WONT. This could be the multifunction switch which is basically attached to your turn signal lever in that model, it could also be the bulb, or the ...
...turn signal lever assembly. Get rude with the lever testing the turn signals, and see if it works. Mine specifically had a problem in the very end of the lever. I swapped it out, and brake and turn ...
replacing a turn signal lever on 1990 chevy s10 truck, do I have to pull the steering wheel. No wires came with the new lever. Just pull it. it should come right out.
what is the proper steps when replacing the turn signals? Discribe what you mean. Bulbs ,Function Stick/Lever
turn-signal switch is faulty. If you can remove the wire connector from the brake light switch and jumper the wires and the brake lights come on then the switch is faulty, and sometimes if you step on
...turn signal/multi function switch. Usually you can wiggle the lever and/or push/wiggle the hazard switch (if mounted on the steering column) and get it to work intermittently. If it you can get it to ...
1988 5-spd. How do I replace turn signal arm? Just the lever should snap in and out.
Question about 1997 S-10 Pickup
turn turn signal on when lights are off it works fine and when I turn head lights on I get both tail lights flash a little bit and fast as if a balb was out help If I understand what you are trying to
...turn signal on, all my rear lights blink too: the other signal, the reverse lights, even the plate lights. The front lights work just fine. Why is this happening? Find and repair the crusty ground ...
Usually answered in minutes!
1,473 Questions
904 Questions
790 Questions
747 Questions
686 Questions
