...turn signal and high beam indicator stay on. I have check the switch , could it be in the multi function stalk ie turn signal lever? The lights will work fine one day and not the next. i have ...
...turn signal lever but when I release the pressure they come back on. I also pulled the fog light relay to shut off the lights. Unfortunately, I believe the only solution is to replace the turn signal ...
...turn signal switch assembly with a used one. The replacement work ok on the fog lights but the rest was bad. As near as I can figure it, the switch assemble is not well made and had many ways to go ...
turn signal lever rapidly. Not to the point of breaking it but you do want to apply a little extra pressure. move it in every direction for about 5 to 10 minutes. do not spray anything into the switch
the steering column of a 1993 Jeep Wrangler? You will have to remove steering wheel,and lock plate,then remove the turn signal cam,and then there is a screw holding the lever to the turn signal switch
turn signal lights Do they work intermittently? Do your low beams go out sometimes when you put on turn signal? Do hazards work sometimes and if you play with switch they work off and on? I just had a
...turn signal completely. Fog light switch off, all turns back on. This does not effect the main headlight. (Fogs are standard factory issue with switch a pull-out on left steering wheel column turn ...
turn signal flasher location depends on year, lots of years under dash or part of combo switch (grab all column levers, that be combo)
Question about 2001 Wrangler
turn signal high beam handle and broke it. The headlights were working on high beam but now they aren't and I need to get home in the dark. Help? dont fool around there, AIR bags are man killers. they
Usually answered in minutes!
635 Questions
545 Questions
532 Questions
469 Questions
339 Questions
