...turn signal fuse. According to the legend on back of fuse box cover, no turn signal fuse exists. I checked ALL fuses - none are defective. I turned on emergency flashers which work fine. I located ...
...turn signal flasher is going bad. The easy way to find wher the flasher is hidden is turn the turn signal on and find the clicking, that is the flasher. The emergency flashers work fine because they ...
...turn signal flasher will look like.then you will have to look for the flasher unit on the fuse panel that looks like the hazard flasher.replace the turn signal flasher and you will have your signal ...
turn signal flasher unit. located hazard flasher but turn signal flasher is not on the same block even though the block is labeled for the turn signal flasher. usually the one flasher serves both turn
...The turn signal flasher and the emergency flasher on most cars are located in the same area. Turn on the emergency flasher and find the sound......the turn signal flasher should be in the same
Question about 1997 Cutlass Supreme
turn signal..flasher replaced. is It the multifunction lever then?? There should be a turn signal flasher and a hazard flasher. They are two different parts. If you replaced the hazard flasher and not
Question about 1997 Cutlass Supreme
...Testing and replacing flasher unit HOW TO REPLACE THE TURN SIGNAL FLASHER ON 02 CHRYSLER SEBRING LXI Saturn series Turn Signal Flasher ...
...turn signal switch could be bad , bad fuse , turn signal flasher would be a likely culprit . hazard light flasher is different from turn signal flasher . Bad flasher unit or multifunction switch. The ...
Question about 1997 Cutlass Supreme
...turn signal hazard combo switch. Did you check the TSIG/HAZ fuse in the rear fuse block ? The rear fuse box is under the rear seat ! Could be a problem with the turn signal/hazard flasher module. The ...
Question about 1997 Cutlass Supreme
...turn signal switch. The turn signal switch receives battery voltage at all times through the HAZARD SWITCH Fuse. When the hazard switch is placed in the HAZARD position, battery voltage is applied to ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions