Questions & Answers for: Chevrolet turn mod chip off

...Turn the ignition key to "run" (engine off). The pressure shouldrise to about 34 psi to 38 psi for 1984-1985 N/A engines, 13.5 psi to15.5 psi for 1986 and up N/A engines, or 53 psi to 57 psi for ...

...rotary button, and coil but still am not getting no fire to Plugs. What else could it be? Engine turns over but no spark on top of the coil where plug wire connects not at any of plugs. Thanks... ...

...Mod) This electronic part controls these things, Cost about $110.00 But the kicker is you have to find someone with a Tech computer that can Flash it with your cars ser # and Code, try to find one in ...

Please describe your is there a preformance chip in my 1993 chevy k1500 4x4 and if so where and how much do they cost i was told there was one and it would raise the rpm before shifting and could get ...

...chipped key from the dealer or a hardware store. then do the relearn procedure. The procedure is , turn the ignition on for ten minutes, turn it off for five seconds, do this three times and after ...

...chip keys. One key works fine but the second key only works to lock/unlock doors and not in ignition. It turns in ignition but engine won't turn over. Is it a programming thing or security ...

4L60E tranny to 4L80E tranny swap in a 2000 Chevy S10 I have a 2000 Chevy S10 ZR2 and would like to know if I can swap out the 4L60E tranny for a 4L80E tranny and if I would have to do any mods? yes ...

I have an 03 avalanche 5.3 and want to install gforce chip gforce Do not install it You can't gain anything at all, once you drive off the lot brand new The vehicle wasn't designed for aftermarket ...

1993 Z28 w/5.7l T1 engine. Where is sacurity mod located? In the ECM. Do you have the chip in the key?

mod does anyone know what that component is or how to identify it? Question edited for clarity and typos. Question moved from Television and Video category. Tweakers messing with alarm and immobilizer