Questions & Answers for: Furuno tuning

furuno navnet 1723 C I have the nav net 1723 and I was out on the boat this weekend and a friend was messing with the buttons when it was in radar mode and after that everything on the monitor was ...

Inverted display on newly installed Furuno Nav Net 1944C Installed new NN1944C radar. The display on the screen is inverted, 180 degrees out of whack. Also, I cannot re-access the installation wizzard

Hello there, I have a 4' radar antena with a Hello there, I have a 4' Furuno radar antena with a 10" GPS plotter. Plotter works perfect showing heading or north up; but radar image is upside down, ...

...the furuno 1715 wil not tune. My new boat rader the Furuno 1715 wil not auto tune. And even hand tuning seems not to work properly. The radar is 5 days old Is there an procedure to initial tune

...have water in out wave guide and we have already bought and replaced the magnetron.Any ideas While tuning set BRG signal is missing is been ...

furuno at 1500 atu i have furuno atu and would like to control it from external switch box.i know i have to provide it with tx sig from transceiver but what other lines do i have to activate to make ...

auto gain does not work Magnetron has drifted out of tolerance, replace. Try manual tune and see if it is stable day to day or if you always have to keep moving the tune. JB 847-746-0100

weak detection of rx your frequency is not correctly tuned the wire on the uhf plug inside the transceiver may be loose. check it to see any sign of loose connection. resolder if loose.

no data at >1mile Radar sweep visible on display. Detection good at 1 mile only "grass". Unit is brand new, recently installed. If the unit is new and never been set up post installation, that's ...

How to program frequency 8113.5 on my Furuno FSS1503 Single Sideband Radio Telephone? I tried to program frequency 8113.5. It's showing but not working. I don't use the antenna coupler or tuner. Could