...tube has become magnetized, possibly by someone getting a magnet to close to it. You can de-magnetize it using a strong magnet (cow magnet or similar). Place the magnet as close the the screen as ...
...de-gaussing/static that followed Volume ok No video Tube gun heater elements not on After about 2 minutes video came on When video comes back and I put it in Service Mode I get Codes: P1 26 Not ...
tube and can it be fixed It could very well be a De-gauss fault, this is caused by magenetic build up. The solution is to try & gat access to a de-gauss coil, you do not have to remove the back of
...so be careful not to lift the trace or the situation will quickly get worse. Don?t adjust these tubes as they are set to the correct alignment already. It is always recommended to open and check ...
TUBE EL MISMO PROBLEMA Y UN AMIGO TECNICO ME *** LA SOLUCION Y LO HICE CON EL Y QUEDO NUEVO SI CON ESA LIMPIEZA SIGE EL AUTO ENCENDIDO LLEVALO A UN TECNICO PORQ ES UN CONDENSADOR ,QUE POR DEMAS ESTA Q
Usually answered in minutes!
2,410 Questions
1,124 Questions
809 Questions
789 Questions
510 Questions