Questions & Answers for: kawasaki KX 125 you tube com

Question about kawasaki KX 125 Motorcycles

1 Answer

...down) and by hand (which will be easy because the caps are off to let the springs come out past the tube-but leave them in as they change the amt. of fluid goin in)push down slow to compress and ...

Ad

that goes from the tank to the carburator. The rest (Smaller lines) are vent lines and a bowl drain tube, that just hang toward the ground

Ad

why do i have fuel pouring out of the tube coming from the bowl on the carb on my 2001 kx 125 The float needle is stuck open and not shutting off the gas. Lightly tap on the bowl with a screwdriver ...

...its on the off switch. which is causing me to lose gas on my carb. Gas is leaving the over flow tube at the bottom only way to stop it is to lean the bike towards the other side that does not

Question about 2003 KX 125

1 Answer

My son has a kawasaki KX 85 (2003) the he rides for just for fun. The problem is he keeps blowing tubes about 8 or 9 so far this season. Has anyone had a similar problem or can you tell me how I can ...

...com Do you have a rim strip to protect the tube from the spokes? Is the rim damaged from tire irons or a sharp burr where the tube might contact it? A broken or missing spoke? Did you take a rag and ...

Question about 2003 KX 125

1 Answer

...one is gas tank to carb the rest are hang down when you tip you bike the gas will run out of the tube and not mess up your engine

Question about 2003 KX 125

1 Answer

...1/4" above the join between carb bowl and body. Turn on the fuel and observe the fuel flowing into tube....once it stops carefully lower the tube until the line you made is even with the split ...

my product problem is kawasaki kh 100 es motorcycle manufactuer year 1979-80. i want kawasaki kh100es owners manual service guide book here are a couple places that you can get a manual for your ...

Question about 2007 KX 125

1 Answer

Hey guys. Just wondering what the proper procedure for removing the front tire from my 2002 kx 125 would be? Dont want to break anything Proper proceedure would include a 17 or 19mm allen socket for ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...