Questions & Answers for: ts 410 420

...ts 420 does not start easily hi there; my stihl ts 420 does not start easily and it shut off by itself after 5-10 mins work. thank you; masoud replace the decompression valve. also check for carbon ...

where is location of serial number on a 420 stihl cut off saw? The Serial is engraved into the aluminum right next to the muffler. Look from the top down and you will see it. Good luck

when fitting coil pack on my stihl ts410 what size gap do you leave? The thickness of a stangard business card. .010-.015 get a free manual from a Stihl dealer like www.arcolawn.com

...ts 410 saw cuts out after about 10 minutes work,it restarts soon after then cuts out after about 10 minutes again? any ideas,thanks dave Sounds like an overheating problem. Are you working in a ...

...ts 410 It should be threaded to the crank. On the end of the clutch it is hex shaped. I always used a metric socket and impact to pop them off. I am pretty sure they are left hand thread and there ...

...ts 420 concrete saw screws will not come out to replace air filter I'm trying to replace the filter on my stihl ts 420 asphalt saw and 2 of the srews just keep turning. I took some of the ...

how to refit a coil spring in a 420 i used a bench vice and has someone help me put it back in

stihl ts 400 has stopped working and sounds rough when pulling the cord Sounds bad, the only answer here is to pull the cylinder off and check the condition of the internals, if there is a lot of dust

ts 410 won't start check for spark, check for fuel, if you have both poss pot and piston

...the 410 is a little lighter, but what are the other differences..if any? maybe here. ...