Questions & Answers for: ts400 piston

Piston of a ts400 cutquik saw is seized in the housing I ran the ts400 stihl cutquik Without measuring the right amount of oil and gas mixture. I did cut fare amount of concrete. But than one day it ...

I bought a rebuild kit for a Stihl TS400 and the piston has an arrow on it is there a reason for the arrow I believe the arrow must be installed facing the exhaust.

...a new carb kit to my stihl ts400 also new piston,rings,barrel,plug and all filters and still will not run has good spark but also has strong kick back for some reason Are you using new fresh fuel

...no compression ,it justs jams Check to make sure the old valve didn't have part of it fall down on top of the piston. I just had that exact thing happen to a TS400 in my shop for

...TS400 with 14" the original diamond blade saw worked for the while, but during cutting 1- 1/4" thick slab stopped working. (Blade stop turning inside the stone and stopped) I restarted it ...

TS400, not a complete rebuil, but I changed the following....Piston, Piston rings, Gasket, Carb, fuel line, manifold, fuel filter, spark plug, decompression button, the ignition module still hasn&

Starting ts410 Fitted new cylinder and piston and carburetter but machine wont start This might be an ignition problem... Try setting in new fuel if that doesn't work take it to the shop.

ts400 quick cut won't draw fuel. New carb installed same problem exists. I am now getting beyond frustrated. It will start and run for a moment on carb cleaner but when its out of carb cleaner i Could

which way does the arrow point on a stihl piston ts400 the arrows on all pistons face to the front of the engine

...TS400 stone cutter not working (no compression) so replaced piston rings, new gasket kit and clean for carb new spark plug (good spark when engin turned over) cleaned all air filters, replaced all ...