Questions & Answers for: true keg cooler temp

...cooler freezes. The coil has also been cleaned. What now? What could it be? Could be the thermostat isn't working and the unit is just running and running all the time. To me that seems the most ...

same problem with our kegorater Can you tell me how you fixed your problem after taking the coupling apart? We did the same think & can't get it to pull beer through the line... email us at ...

...keg. You should also check your condenser coils, make sure they are clean. Door gasket should also be in good repair. Hope this helps. The internal temp will get down to 40 degrees but the fans won't ...

...foam new keg settled for 3 hourd temp 38 3/16 line psi 9.5 help Turn off the co2 for now. Turn it on when you need it, but start at a much lower pressure like 2-4 psi. Adjust pressure as

I have a beverage air kegerator that seems to work fine, but the evaporator fan runs constantly. Is it supposed to run constantly, or is it supposed to cycle on and off with the compressor, etc.? Most

...true 2 keg beer cooler and it has recenty been not able to turn off the cooler and freezes the beer. is this a problem with the thermostat or something else? This is probably the thermostat stuck ...

true cooler frezzing kegs of beer I have just started having a problem with my true cooler frezzing my kegs of beer whta temp should I dial it on to solve this prblem If I am not mistaken, the True ...

I have a Rapids brand kegerator that cools like crazy. When Iadjust the control to stop at the desired temp it will not start again when it warms up. temp switch? Easy to check. Jumper thermostat ...

...keg cooler is plugged in it gets down to 20 degrees and freezes the beer. Can this be fixed? This solution probably costs more than you care to spend on the problem, but you can buy an external temp ...

...keg and lines freeze. Display panel has temp display but cannot make temp inputs or change C/F. Sometimes displays "LE". Powered off several times. Any ideas? Do I have a display panel or ...