Questions & Answers for: Chevrolet Tahoe trouble code 55


trouble light was on and it was diagnosed as( 2) o2 sensors. Will that eventually cause me to stall out and then just stop running altogether? ignition control module a bad fuel pump could have leaned


Question about 2000 Tahoe

2 Answers

...trouble code, diagnosis can be tricky at times. Here are some things to try: Remove and reinstall the gas cap, clear the code, and drive for a day and see if the codes come back.Inspect the EVAP ...


...Most local Auto-parts store will do this for free for you. They will tell you what the trouble code means. Then, you'll an idea on what it is and who you need to take it to get the problem

Question about 1997 Tahoe

1 Answer

...came on The only way to read the diagnostic trouble code stored in the onboard computer is with a diagnostic scan tool. Some parts stores such as Autozone will read the code for you for free. Good ...

Question about 1995 Tahoe

1 Answer

...cap and rotor would be a big help. Make sure the air filter is clean. Have the engine scanned for trouble codes to see if any of the sensors are indicating problems. I'm pretty sure you are going

Question about 2003 Tahoe

1 Answer be fixed, for the light to remain off. Have the trouble codes read to find out what the problem is. Then, the light can be reset with a code scanner and should remain off if no trouble codes

...trouble codes. If the engine issues are addressed first, the traction light may normalize eventually. A scan tool code search is the first best option for a quick diagnosis. For the time being. you ...

2001 Tahoe no check engine light. will not pass smog due to stored trouble codes. air valves , catalytic converter Passed the sniff test but did not pass with stored trouble codes. Air valves and cat.

In most cases you have to figure out if it is spark, fuel, or compression to proceed. A mechanic would also check the computer for trouble codes but you would need a scanner or code reader to do that

Question about 1996 Tahoe

1 Answer

trouble codes Code 300 is for a random cyl miss, and code 1345 is for a problem with the correlation between the crank sensor and cam sensor signals. The computer is having trouble finding the correct

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides