Questions & Answers for: Honda CR-V trim tech spares

Question about 1999 CR-V

1 Answer

location of wheel jack Where is the jack located? Lift up the table or cover on spare tire and the plastic housing for the spare tire then lifts up (by removing some simple pins) and the jack is ...

Ad

...panel to get to the door latch to repair it? Also what parts will I need to repair the latch? Use a trim stick or pair of small screwdrivers to pry the door panel up. First you should remove the ...

Ad

Question about 2003 CR-V

1 Answer

Spare Tyre I have no Manual , as the car is an import . So i dont know how to release the spare Tyre, with i know is underneath the car ?? There is usually a bolt to release it under the carpet/floor ...

Remove lower rear trim beneath tailgate I need to remove & reposition rear trim below tailgate (someone reversed into it and dislodged it and damaged one of the sonic sensors. How easy is it to do ...

...defrost off, and accelerate to 55 mph at half throttle. OBDII checks for ignition misfire, fuel trim and canister purge. 3. Hold at a steady state speed of 55 mph for three minutes. OBDII

Question about 2004 CR-V

1 Answer

...READS TPMS - WHAT DOES THAT MEAN? Well it would help if you place the year and make model and trim. TPMS=tire pressure monitoring system must be indicating that one of five tires including the ...

...on the 2003 Honda CR-V. There's two fuse: 1. Fuse#4 (10amp) fuse box on top driver feet behind trim cover. 2. Fuse#7(15amp) fuse box under hood. If you're having problem with cruise control and ...

Question about 2007 CR-V

1 Answer

key won't unlock driver door key will not unlock driver side door but wil lock it. remote fob will unlock it. the key or fob? the key is bad, use the spare key that came with all new cars. always keep

HOW DO I TURN OFF TPMS LIGHT ON DASH PUT AIR IN TIRES Air up all of your tires to the factory recommendations. You can find out what pressure to set your tires at in your owners manual or on the ...

...need a release tool to get them out of the holes in the metal they are pushed into, it is called a trim panel release tool. Any auto parts store will have the tool, below of one of the many designs ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

2003 Honda CR-V
2003 Honda CR-V

547 Questions

2004 Honda CR-V
2004 Honda CR-V

447 Questions

2002 Honda CR-V
2002 Honda CR-V

400 Questions

2005 Honda CR-V
2005 Honda CR-V

370 Questions

1998 Honda CR-V
1998 Honda CR-V

337 Questions

Manuals & User Guides

Loading...