Questions & Answers for: Makita trigger is stuck


Question about 18V LXT Lithium - Ion Cordless Impact Driver Kit Model BTD140

1 Answer isn't easy as you have to hold the shaft that the chuck is attatched to. You can sometimes take the chuck off by holding it and pulling the trigger while in reverse. (but they can be stuck


Question about Tools 18V 1/2" Lxt Lithium - Ion Hammer Driver - Drill Kit - BHP451

2 Answers

...stuck full open If you haven't fixed it yet here is the way that I have used to solve this problem. Spray some WD-40 on the inside of the chuck. Place a shop rag around the chuck and CAREFULLY grip ...


Question about Tools 18V 1/2" Lxt Lithium - Ion Hammer Driver - Drill Kit - BHP451

1 Answer

...trigger the LED light lights up, but the drill is not spining. my batteries are in perfect condition and charged. I took drill apart and i noticed that one "Carbon Brush" is stock in it's ...

Question about AN943 3 1/2" Framing Nailer

1 Answer

...stuck head valve or a jammed nail. Here is a parts diagram so you can see the items and part numbers that make up the trigger should you decide to try and repair it yourself. If available it is ...

Question about BFR750 18-Volt LXT Lithium-Ion Cordless Autofeed Screwdriver Kit

1 Answer

trigger stuck down It cold be dust causing the switch to stick. Remove the handle cover and check.

Question about 18 Volt Lxt Bjr182 Recip Reciprocating Saw Gift

1 Answer

Makita cordless saws all wont turn off trigger is stuck on seperate the handle halves and see if the trigger lock is hanging up. If not replace the switch.

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Makita Drill Experts

John Trevino

Level 3 Expert

1420 Answers


Level 2 Expert

113 Answers


Level 3 Expert

4369 Answers

Are you a Makita Drill Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides