Questions & Answers for: trigger lock jammed

...trigger lock are both jammed in and I can't get the saw started. it's a Poulan 16 inch chain saw. Does anyone know if there is something I can do to release them short of taking it apart? The handle ...

trigger jammed loosen the cable, spray some wd40 into mech and strike lightly with screwdriver handle, you will hear click if it locks out, Failing this check your cables for corrosion as it will also

...obvious but found nothing. The motor will turn by hand but the chuck is still locked and the motor doesn't respond to the trigger. the pin that shift from one setting to an other is jammed ...

...lock but it dosen't want to start its cycle. And wen it does start it won't drain all the way. Possible that the drain valve is defective, jammed or there is no trigger from the ...

door jammed Rear right door is jammed closed, chilled lock on and outer handle not working. How do I get it open? You will need to remove the door panel and manually trigger the latch to open the door

...door lock is jammed or there is no trigger from the door switch or lock. Also this can be due to fault in the control panel, check the input/outputs from the controller unit. Click this link: door ...

...Click this link for tips to reset the lock: Door lock Check the continuity of the door switch and see if the harness connects to the control board to trigger the start cycle when the door is

...lock cylinder not being straight. With keyless entry and alarm systems, the key locks (and the transmitters) use ground triggers for a couple of things. First of all, a ground trigger is used to ...

trigger moves in when you squeeze it but you don't hear any change in the engine sound then it's probable that the throttle wire has disconnected at the carburetor or at the handle. Is the chain brake

stihl pole saw throttle trigger is locked. How do I fix it? It's locked fully open Study the mechanism to see exactly what is jamming it up and then take action to free it.