Questions & Answers for: HP LaserJet tray will not open

...open tray 2 and tray 3 and try it. Take the paper out of the trays and check the trays mechanism, lift the tray by hand and make sure nothing is obstructing the movement or something

...Tray will not open I just bought this printer and the paper tray refuses to open. Nothing has ever been put into it because it has yet to be succesfully opened. Is there a lock on it somewhere? Can ...

...click" the printer icon Select "properties" Select "device settings" under "installable options" Click on "tray 3 -not installed" to open drop down menu. click "installed" Please rate my solution

...Open EWS page (printer page) in Internet Explorer. 2. Log into printer as administrator 2. Click on Settings tab, Configure device, System Setup 3. You will find Tray Behavior 4. Change tray 2 model ...

tray. Open the duplex unit access door just above Tray 2 on the front of the printer. Check the black-paper present flag by looking in through the duplex access door. Open and close Tray 2 and observe

...Open the tray and verify that the media stack is below the maximum stack-height mark. The paper is sticking together > Remove the media, flex it, rotate it 180 degrees, or flip it over, and then ...

...tray when you open the front door. Since only the left side does its work to raise the tray and the right side does not, you have a problem of having the tray to slide out.  If you are still ...

...error 60.02 plz help me. Tray 2 is not lifting the paper. Open the tray and look for obstructions. Remove and reseat the tray. Try switching trays 2 and 3. If that doesn't work, reply back to

...tray 1 is open i thought it would automatically know i want to use manual feed. Not necesarily so, it depends on how you have the printer configured. To test the MP tray, use the arrow keys to get to ...

How can I get tray 2 to close in place? Tray will not close, or latch in place. Error code Drawer 2 open Please make sure nothing is in back of the paper tray.