...Tray 2. The preheat flag tripped unexpectedly while picking paper from Tray 3. The preheat flag tripped unexpectedly while picking paper from Tray 4. The preheat flag tripped unexpectedly while ...
...tray 2 (loading paper from the bottom tray). It works fine from tray 1, the front tray. I've replaced the separation pad in the drawer and the pick up roller for it that is underneath the unit. I ...
Question about imageRUNNER 2020 All-In-One Laser Printer
...tray 2 needs paper. Have carefully reloaded and closed tray, interchanged tray 1 and 2, no help. The sensor must be bad or ?? Anyone had this problem? Are you check the sensor flaper for paper ...
• Worn or contaminated pick tires • Overfilling of tray past the fill line. Solutions --------------- 1. Fan media. 2. Turn media over. 3. Reduce amount of media loaded in tray 1 4. Replace pick tires
Question about Officejet Pro L7580 All-In-One InkJet Printer
...2) A paper feed operation that does not send paper into the printer will get reported as a jam it the paper does not reach a sensor in the time that is allotted to reach the sensor. The printer knows ...
...tray and look for misfed paper. There are two types of paper jams: 1) A jammed piece of paper at or near a sensor. Or a shred of paper is stuck under a sensor. 2) A paper feed operation that does not ...
Question about LaserJet 2430 Printer
...TRAY 2 SAYS JAM BUT NO PAPER IS STUCK IN THEIR HP2430 TRAY 2 SAYS THERE IS A JAM AND IT NEEDS TO BE FIXED BUT I CHECKED TRAY 2 AND THERE IS NO JAM . WHAT IS THE REASON? HOW CAN I FIX IT? look it the ...
...Tray 2 error when no jam exists Check Tay2 paper sensor flag, located at tray2 pick up roller, its its stucked shoot the fault hp laserjet 4015 error code 13.98 paper jams in fuser. REpalced fuser, ...
Question about Konica Minolta Bizhub C452/552/652 Mag Iu612m
tray 2 When I print from tray 2, paper jams below the bypass tray There is Registration Sensor located near the bypass tray.Please clean the sensor or else replace the sensor or DC board.Orelse please
Question about Konica Minolta Bizhub C452/552/652 Mag Iu612m
...Tray 2. So the problem seems to be specific to paper pickup in Tray 2 with multiple pages presumably being picked up sequentially rather than simultaneously based on the separation along the paper ...
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions