Questions & Answers for: tray 2 lifting hp laserjet

...tray 2 waiting to lift" or "tray 3 waiting to lift." I have tried several things from the HP website to no avail. Any help would be appreciated. open tray 2 and tray 3 and try it. Take the paper out ...

tray 2 not empty I have a HP laserjet 8000 that after about half of the paper is gone it says tray 2 is empty. Then it also says tray 3 is empty when it is full. I think the little black thing hanging

...tray 2 and setting it on the floor. Next take out tray 3 and slide it into tray 2. Print from tray 2. If it works, take the tray on the floor and put it into the tray 3 slot. Print from tray 3. If it ...

...tray 2 to be lifted. Take tray tray out of the printer and check for obstructions preventing lifting of the paper. Switching tray's is possible to ascertain if the problem lies with the tray or the ...

...tray 2 & 3 will not lift Any message appearing? like 60.X ? '*Open 'tray two' check 'open message (if No check switch 102) YES '*remove tray2 lift drive ...

...Tray 2 lifting error. To fix this error, check the surface sensor of the paper tray2 in the Manual Sensor Test 2 menu under the Troubleshooting menu. Connect back the cassette lifter motor and the DC ...

hp laserjet 600 m601 printer that is displaying the error 49.38.07 "to continue turn off and then on" what could be the problem? how do I diagnosize this? I have a hp laserjet 600 m601 printer that is

reset hp laser m603 HP LaserJet Enterprise 600 M601, M602, and M603 Series Printer - Restore factory settings:

...m602 tray 2 open error - HP Laserjet 600 M603dn Laser Printer - Monochrome Any idea ? https://www.metrofuser.com/post/tray-2-open-error-on-the-m600-series-printers Hp laserjet 600 m601 error ...

tray 2? Tray 3 works fine. I can't see any problem. Got a new tray to see if it was the problem... got the same result so not the tray itself. Question edited for clarity full 'make model (what it is)