Question about Optra T614 Laser Printer
...Tray 2. try reseating printer on top of duplexer/tray. these 6 pin connectors have a clip on each side that is a part of the connector they are to hold the connector in place if either one of these ...
...tray 2 or duplex On T642 lexmark the unit does not recognize tray 2 or the duplex unit installed. Setup only shows tray 1 and mp as tray options. It is not the tray 2 or the duplex unit because ...
Question about X2350 All-In-One InkJet Printer
...tray on new laptop , how cam i install my printer without using the disk Copy the disk on a regular computer or laptop with CD to a flash drive and install from there. Or connect to the internet and ...
Question about X2350 All-In-One InkJet Printer
...tray 2 when tray 1 empties - Lexmark T654 What setting do you change on a Lexmark T654 printer to get it to pull paper from tray 2 when tray 1 empties? For the majority of the Lexmark printers, all ...
...tray 2 Squeaking noise from tray 2 take your printer off of the lower tray. the pick wheels are installed on a plastic axle if you apply just 2 drops of 3 in one oil to each side of this axle while ...
...tray 1) and above any option drawers (trays 2, 3, etc). Removing it is just a matter of lifting up the printer from the duplex option and then lifting up duplex unit removing it from the option ...
...2 tray) 2000D to print A5 and A4 sized repears and reports. My Kyocera is broken down and want to know if I can replace it with your LEXMARK 2 tray laser printer, for the same job, and also if you ...
...Tray 2 is missing. Insert the specified tray(s) into the printer. TR Belt Life: Replace Transfer Belt The transfer belt is exhausted. Install a new transfer belt. TR Kit Life: Replace PQ Kit The ...
Question about T630 Laser Printer
tray 2 but will not print from tray 2. When printing we would go into the program to print from tray to and to test if the printer is using tray 2 tray 1 is removed. when the printer starts to process
Question about T630 Laser Printer
tray 2 but it will not print to tray 2. When printing we select tray 2 in the program and pull out tray 1 to test if it still pulls from tray one and when the printer gets the job it give the alert to
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions