Questions & Answers for: transducer mounted water

Question about A65 Combo GPS Chartplotter/Fishfinder

1 Answer

...transducer. Look under the hull where the traducer is mounted and look for a part that has no obstruction including saltwater pickups, hull relieves, etc. The other thing to check is to take a strait ...

Ad

Question about Riptide St Saltwater 80 Bow Mount Trolling Motor

2 Answers

...water. Did you get the US2 universal sonar model? if not then you will have to mount the t'ducer on the bottom of the motor using a trolling motor mount from lowrance.Because of the way you have to ...

Ad

Question about X135 Power Pro Sonar Without Transducer

2 Answers

...mounted transducer. The problem is sometime it works fine then the screen shows lines up and down the depth will go from 10ft to 100+ ft in 10 foot of water. And the tempature always reads 32 no ...

Question about A65 Combo GPS Chartplotter/Fishfinder

2 Answers

...mounted 50/200 kh transducer. When the 200 kh is reading the bottom fine even at high speed. The 50kh even in shallow water is not reading the bottom very well in deeper water its not reading at all. ...

Question about X136df Fishfinder With Dual Frequency Transducer

2 Answers

Mounted Replace Transducer. Hope this Helps Gordy Transducer can be broken and hanging loose on wire or could face not directly toward bottom. Other possibility it too much growth on transducer and in

...transducer be mounted inside the hull? It currently gives me strange readings whether inside or out but we are on dry land - if that makes a difference there are two kinds or transducers out there on ...

Question about XNT Transducers XNT 9 20 T Mounting Unit

1 Answer

...mounted transducer which I mounted in a piece of plastic pipe, epoxied in the bilge of my Fibreglass boat and with a screw top on it to seal the container.It has been satisfactory up until now when ...

...transducer mounting location.I installed it acording to instructions. Boat transom rides low in the water and water passes thru mounting bracket.It is reading depth correctly even when up on plane ...

...transducer (depending on which one you have) should be mounted to the hull of the boat. If a transom mount, at the back of the boat of course and if a through-hull or in-hull ducer in an area that ...

...transducer mounted? I need more info about when it stops reading. 1.Wrong setting on the unit 2 Bad transducer 3 Bad transducer mounting (either inside the hull or outside the hull.) 4. (In hull) ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top GPS Experts

k24674

Level 3 Expert

8093 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66952 Answers

Are you a GPS Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...