Questions & Answers for: trailing arms

...trailing arms to the actual hub are slightly bent. my question is: what do you call this set of bolts and the propper name for the trailing arms. Parts guy would likely understand trailing arms, or ...

Ad

Question about 1996 Civic

1 Answer

trailing arm troubles I've recently removed my rear trailing arm to replace it with a new one but the new trailing arm didn't come with the spindle on it. I started removing the spindle from the old ...

Ad

Question about 2003 Santa Fe

1 Answer

...arms required. See the picture below. The picture shows the rear suspension parts. Notice that the upper control arm and the lower control arm bolt to the trailing arm. (which is what also houses the ...

Question about 1995 Camry

1 Answer

I was replacing the right rear trailing arm. The upper bolt (goes through the bushing in the trailing arm) came off ok, but I sheared the head off the bolt that attaches the "fork" end of ...

I need rear trailing arm bushings for a 2004 Chevy Aveo I need rear trailing arm bushings for a 2004 Vhevy Aveo Just enter the part as a Browser search term and you will get Autoparts sites on the ...

...Chevy Monte Carlo it's part of my suspension. I just don't know if it is a control arm or a trailing arm making them have 3 trailing arms..... Looks to be a two piece lower control arm

Question about 2004 Aveo Sedan

1 Answer

rear trailing arm santa fe IS THIS THE ARM THAT IS ATTATCHED TO THE FRAME? BECAUSE MINE CAME OFF BECAUSE THE FRAME IS TOO RUSTY AND IT IS LIKE IM STEERING WITH MY REAR WHEEL. WHAT IS THIS ARM CALLED? ...

Question about 1998 Expedition

1 Answer

...trailing arms best done with the weight on the vehicle remove the bolts going through the arm insulators and remove the arm. do one side at a time and try not to move the wheel. Lower trailing arms ...

can I replace a rear trailing bushing on the vehicle without removing the entire trailing arm i want to use an on vehicle bushing press You can. I remove the bolt and insert a block of wood between ...

...removal procedure in this section for specific details. Carefully remove the halfshaft from the trailing arm assembly by tapping on it with a plastic hammer, or using a suitable drift and hammer. ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...