...TPS, ETP, IAC sensors. 22. Faulty neutral, clutch, kickstand safety switch. 23. Faulty fuel pump or fuse or relay. 24. Faulty or corroded run/stop switch. 25. Tilt sensor needs a reset. 26. Security ...
Question about 2005 Vitality 2T 50
TPS, or BAS sensor, corrroded, loose or broken wire connector pins/sockets. 8. Water or dirt in the fuel system, carburetor or filter. 9. . Restricted, blocked or kinked fuel line. 10. Fuel tank empty
...TPS, or BAS sensor, corroded, loose or broken wire connector pins/sockets. 8. Throttle cables and or idle speed improperly adjusted hot idle speed should be 950 RPM to 1000 RPM. 9. Air/fuel mixture ...
...TPS, ETP, IAC sensors. 22. Faulty neutral, clutch, kickstand safety switch. 23. Faulty fuel pump or fuse or relay. 24. Faulty or corroded run/stop switch. 25. Tilt sensor needs a reset. 26. Security ...
...TPS, or BAS sensor, corroded, loose or broken wire connector pins/sockets. 8. Throttle cables and or idle speed improperly adjusted hot idle speed should be 950 RPM to 1000 RPM. 9. Air/fuel mixture ...
Question about 2010 People S 200
...TPS, O2 sensor. 9. Intake air leak. 10. Water, dirt, or rust in the fuel system, carburetor and/or filter. 11. Fuel tank vent system plugged or carburetor vent line closed off. 12. Vacuum line from ...
Question about 2010 People S 200
...TPS, or BAS sensor, corroded, loose or broken wire connector pins/sockets. 8. Throttle cables and or idle speed improperly adjusted hot idle speed should be 950 RPM to 1000 RPM. 9. Air/fuel mixture ...
...TPS sensor out of adjustment or faulty. 6. Wrong spark plugs for the type of service. 7. Throttle bodies not in synchronization (FI) 8. Faulty O2 sensor. 9. Clogged, stuck, or faulty IAC valve. 10. ...
TPS, ETP, IAC sensors. 18. Faulty neutral, clutch lever, or kickstand safety switch. 19. Faulty fuel pump or fuse or relay. 20. A stuck bent or burnt valve. 21. Tilt sensor needs a reset. 22. Security
Question about 2009 People S 50
...TPS, or BAS sensor, corroded, loose or broken wire connector pins/sockets. 8. Throttle cables and or idle speed improperly adjusted hot idle speed should be 950 RPM to 1000 RPM. 9. Faulty neutral, ...
Usually answered in minutes!
652 Questions
681 Questions
595 Questions
586 Questions
644 Questions