Questions & Answers for: Canon touch screen

touch screen. Press the 'system settings' button ON the touch screen. Press the 'system manager settings' button on the touch screen. Press the 'system manager' button on the touch screen and then use

...touch screen on my copier seems to have shifted. Now instead of touching the buttons on the screen I need to touch the screen about a half inch below each button. Is there any way I can recalibrate ...

Touch Screen Problem The touch screen does not recognize touch anymore. Is there a way to reset this? check all the buttons on control panel if one is stuck it will lock them all just push all of them

...touch screen panle of Canon IR-6000/6001. Alignment of the touch screen is disturbed and I can't use the tocuh screen properly. I believe under the aditional funcation screen, you can calibrate the ...

...Touch Screen Here is the problem, and it seems to be a common one among Canon ImageRunner Touch Screens. The alignment seems to be off. The top row of options (i.e. Copy, Fax, Scan, Mail) cannot be ...

...ERR but nothing registers. So therefore, cannot clear the error message. the co ordinates of touch screen may have disturbed try, touching surrounding area of clear button or replace touch

irc 3220 touch panel not working check the connection of touch screen or   replace touch screen panal only...

touch screen not responding at all If the copier works but the touch display won't respond, you will need to have the touch screen panel overlay replaced. That is a very common problem that happens to

...touch screen stop working How to get touch screen to start working. If the copier still works but the touch display won't respond, you will need to have the touch screen panel overlay replaced. That ...

...Screen Show Special features DO NOT TOUCH RESET or Any botton touch MODE MEMORY select M1 touch STORE then done then OK Press the Additional Function Bottoan touch Copy Setting touch Standred key 1 ...