...touch pad or clock assembly (also called the ERC) or attempt to un-stick button F7Shorted key sensed for 32 seconds1. Membrane shorted, or, 2. Display board defective If touch pad is a separate unit ...
Question about JES9800A Electric Kitchen Range
Touch Pad Had continual beeping- touch pad not working- replaced with new control panel (clock w/harness) After a few seconds beeping returned, oven controls don't work buy eyes do. What do I do next?
...F1 defective touch pad or membrane. 1. replace touch pad or membrane ( this problem is usually the touch pad). or F! watchdog on board. 1. replace touch pad or clock assembly (also called the
Question about 27 in. Electric Single Wall Oven with Multi-Mode Convection
touch pad not working properly. Number Touch pad is not working and also the Bake pad is working occasionalyy.I have cut out the power and restarted the oven, but no change.I have also held the Cancel
Question about 27 in. Electric Single Wall Oven with Multi-Mode Convection
...the bake setting. Defective touch pad or membrane Replace touch pad or membrane (this problem is usually the touch pad) if you are handy you can remove control board ribbon clean in and
Question about JGR8775QD Gas Kitchen Range
touch pad will not work thus rendering the oven useless. It will not respond to touch. Is there anything I can do sans a new processor pad? HI. Unfortunately, the touch/key pad is not repairable. Once
...should be taken F1 Defective touch pad or membrane Replace touch pad or membrane (this problem is usually the touch pad) F1 Watchdog on board Replace touch pad or clock assembly (also called the
Question about SVE47100 Slide-In Electric Kitchen Range
...touch pad or if touch pad is part of the clock, replace the clock (ERC).F1 Defective touch pad or clock (ERC) Replace touch pad or clock (ERC). Touch pad is a more common problem. Refer to F1 test at ...
OVEN ERROR CODE F1 F1Defective touch pad or clock (ERC) Replace touch pad or clock (ERC). Touch pad is a more common problem. Refer to F1 test at the top of this page for more information.
touch pad problem. F8 indicates a clock, or ERC (Electronic Range Control) problem. Are you receiving both codes? If so it seems likely that your touch pad and ERC are contained together in one module
Usually answered in minutes!
247 Questions
150 Questions
116 Questions
106 Questions
74 Questions