Questions & Answers for: toshiba vertical hold

Question about 42H83 42" Rear Projection HDTV-Ready Television

2 Answers

toshiba 42wh36p 3 years old and it has developed line tearing or line hold drift (chassis co3p) Please define line tearing or line hold drift==Do you mean horiz. or vertically?? Is the problem the ...

Ad

Question about 42H83 42" Rear Projection HDTV-Ready Television

1 Answer

...Toshiba TV 32A41 problem TV has a 1 1/2inch horizontal bar that distorts the picture at the top of the TV screen. Could the vertical hold be out of adjustment? If so, how does one adjust the vertical ...

Ad

Question about 32A43 32" TV

1 Answer

...Toshiba 32A43 loses vertical hold on bright or mostly white scenes. It does this with it's tuner or the S-VHS input.Otherwise it has a great picture. There is a fault in either the input video amp, ...

Question about REGZA 42WLG66 42 in. HD-Ready LCD Television

2 Answers

...toshiba. Lot of people having same problem. Should get aclass action lawsuit started selling defective LCD screens. Kathy in Cleveland,OH i have the same problem a thin black vertical line on the ...

Question about 57H82 57" Rear Projection Television

1 Answer

Toshiba 50H72 horz. hold problems, top half of the screen zaggs The top half of the screen is the worst. The problem is getting worse over time and and when cold. Is there an adjustment or control pot

Question about 42H83 42" Rear Projection HDTV-Ready Television

1 Answer

Toshiba 42H83 model projection HD tv has a bad wavy picture. The touch focus does not help, I think it's the vertical hold. Can this be fixed? yes it can be fixed call a repairman and have them come ...

Question about 42H83 42" Rear Projection HDTV-Ready Television

1 Answer

vertical hold gone on Toshiba 31" TV model cf30d50 Hello Hinden the problem is more than likely the vertical hold deflection IC that is faulty and has to be replaced, if you were to get a service tech

Question about 50H82 50" Rear Projection Television

1 Answer

...Toshiba 50h82 with what appears to be a horizontal hold problem. I have replaced the two modular boards off of the main board. This allowed me to adjust the one potentiometer and get the menu ...

Question about 50H82 50" Rear Projection Television

1 Answer

...vertical hold? No vertical hold adjustment available. Vertical hold is controlled by a chip in the unit and from what you indicate, it is "out" on the unit. A tech can remedy your problem, "if" you ...

...Toshiba regza. Vertical lines on an lcd screen are caused from the solder joints on the edge of the lcd panel coming loose. You can verify this by pressing on the edge of the screen above the lcd and ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Cindy Wells

Level 3 Expert

6688 Answers

 Grubhead
Grubhead

Level 3 Expert

5755 Answers

Are you a Televison & Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...