Toshiba 46HM94 This TV have good sound,OSD ok, Menu shows up but I cannot get a picture from any of the inputs or tuners, I changed the back AV board, but the problem still exists. Thanking you in ...
...toshiba remote have a universal remote. Not able change tv to video 2 or 3 What are the steps to change? As far as I'm aware, the only way to switch inputs on the TV is by using the Toshiba ...
input here what the specific name of the device.. if you were using a universal remote, this will need to be reprogrammed again into your tv and able to use it again.. Is the remote a universal remote
...Television: JVC I'Art AV-32DF74 (2 years old-1080i w/DVI input) DVD: Toshiba XD-E500 (brand new-HDMI output) Never had anything hooked up to digital input on TV (always used component hook-ups) until ...
Question about G27647 27" TV
...Toshiba DVD and it needs the TV to have an external channel which can only be set by remote? Is this needed even though I use the RCA ports? The cable is connected to the TV. Is this correct given we ...
...Toshiba tv with av inputs on front panel. The original remote is lost and I'm using an RCA universal rcr311st that works fine for television functions but I cannot get it to switch the input to "aux" ...
Question about WD-57731 57" Projection HDTV
Toshiba combo VHS-DVD recorder VHS part of the machines video is connected to input 1 Input 2 is connected via s-video to the audio receiver for the on screen display for that device. It has had a few
toshiba television will change from tv/video mode to tv changes from by itself tv/video mode to video 1 then to video 2. i cannot get the remote to work while this is happening. when the tv stops ...
...Toshiba). Did input selection to video 1...nothing but sound only. If the Toshiba TV is an LCD flat panel, then the backlight or the backlight inverter is the probable issue. The backlight itself ...
...video input by itself or demo mode. Any solutions would be much appreciated!! Your TV needs servicing.You need to open up the control panel and check the buttons for "menu". maybe its stuck ...
Usually answered in minutes!
2,410 Questions
2,254 Questions
1,646 Questions
1,423 Questions
1,438 Questions