Question about W522 VHS VCR
Toshiba W522CG, was working fine. Then a button was pressed on the remote (I don't know what button, but i suspect the l.select). Since then, when I try to access the set up or programming through the
Question about TZ50V51 50" Rear Projection Television
Toshiba remote. Got PIP up but cannot advance channels in PIP box. Only the channel that's selected will show in the PIP box. Help! I think you will need a diferent signal applied to the antenna a and
Toshiba Remote #CT-847 The cable Company have changed their TV Channel line up. In reprogramming my TV only shows the first 13 Channels. I should be able to get 114 Channels. where can I get the ...
Question about CT-90157 Remote Control
...toshiba to cable in another room without set top box and the ct 90157 wiill change channel, but it will show the channel for a second and the channel will go to static only no picture We found the ...
Can't see my cable channels! I see about 17 basic channels but there should be 70 or so.... I programmed my universal remote for the tv but I can't get the cable to work. you have to scan threw the tv
Question about 46H84 46" Rear Projection HDTV-Ready Television
Toshiba 46H84C television without the remote control. I believe theaspect ratio is incorrect as the "tickers" at the bottom of some channels do not show up. Is there anyway to correct the aspect ratio
Toshiba TV 27AF42 purchased 7-2-02 Have cable universal remote will not turn on TV I can turn it on manually when I put in a channel it shows the identification at the bottom of the screen but then it
...toshiba remote for watching a dvd (which is usually not used because I have cable remote) now cannot get back to tv...it's all snow..I thought if I changed the toshiba remote to channel 3 it would be ...
...Toshiba remote was functioning more+more slowly ( I changed batteries on the original Toshiba remote first) After programing the TV Mode on the new universal remote sucessfully I tried to program the ...
Some information is needed for a better answer: where connected and what is used for signal (box?).You can of course direct enter with the remote a known channel to see if it goes there and has signal
Usually answered in minutes!
2,410 Questions
2,254 Questions
1,646 Questions
1,423 Questions
1,438 Questions