needle will not pick up bobbin threat My Euro-Pro Shark 473 was bunching the thread under the fabric when sewing and also wrapping the thread around the shuttle driver. The Euro-Pro website states ...
Question about Steam Generator EP8001 Iron
...driver bit that removes the unusual 6 sided screw with a center post that is holding everything together? The screws holding the unit together are T-20 TORX screws; the center post makes them ...
Steam Iron stopped working, unable to disassemble it My wife has been using a EuroPro steam ironing unit, model EP8000, ser # AE ZZ 00035471 for a number of years and it just stopped working. I would ...
I bought a Euro Pro Shark Steam Vaccum about 3 yrs ago. Now, suddenly, it won't switch on. I checked the power receptacle and tried other receptacles. It still won't switch on. I wanted to open and ...
...torx t-20 security bit driver), under the tank is a connection that may have rusted out re-connet it and turn the iron on. Once it heats up, check the tank for leaks. The tank may need to be replace ...
needle will not pick up bobbin threat My Euro-Pro Shark 473 was bunching the thread under the fabric when sewing and also wrapping the thread around the shuttle driver. The Euro-Pro website states ...
Question about Cordless Bagless Upright Sweeper - Blue/Gray
How do you open the Shark V15X vacuum to get to the belt? You will need a long skinny phillips head screw driver as many of the screw are very deep in narrow holes to prevent un authorised access. If ...
Where do you find a screw driver for the Shark Steam mop? It appears that the philips screw on the steam mop is a 'bit unique'. I found that picking p a cheap set of small drive tools (like would go ...
Question about Steam Generator EP8001 Iron
driver does it take? Allen wrench doesn't engage. Sounds like a 'TORX' head. Does it look like a 'star' inside the screw head? A six-sided star? If so, then it is a TORX head. Look
How do you open the back of an iron There is a short in the cord and I want to open it and repair it but cannot find the right screw driver/instrument the best way is to use the little screwdriver for
Usually answered in minutes!
132 Questions
105 Questions
58 Questions
66 Questions
64 Questions
