Questions & Answers for: Dewalt torx driver

...driver setting. I have tried loosening and tightening the keyless chuck several times, but that seems to do nothing yet. HELP!!!! Get a torx bit, either 10 0r 15 & slowly undo screws about one third. ...

...are unique to me and I'm wondering where to get a screw bit like that and what is it called? A TORX I believe , if it is a 6 point star type screw hole? They are measured in mm I think and 15

change chuck on how to remove tork screw The torx screw if Left hand thread.

get the screws out of the charger? DW9107 usually it is a number 1 or 2 phillips or they used a #10 Torx drive bit for the screws. if it is star in shape it is the torx

...12 volt drill Hi there, Remove the battery and sometimes the screws on the drill casing are a torx instead of phillips so you will need a set of torx screwdrivers. Once you have removed the ...

...screw with a 3/16 th's bit. Don't drill the head of the screw off, just drill deep enough for a torx bit to hold. Take a T-30 torx bit and tap in into the hole you have drilled. Then turn the ...

...anything. This tool might have an access cover to inspect the brushes, they are I belive a T15

Is it a torx or allen head screw that holds the keyless chuck on a Dewalt Cordless Drill model # dw959. If it is a torx, what size is it ? Is it a right or left handed thread ? don't know the sizes ...

...the right thing? Randy Jones The screw is a reverse thread torx t20 head. One you have the torx t20 screw driver from a hardware or tool store you need to turn it to the right to loosen the

driver blade. then you will have access to four #10 torx head screws that hold the transmission on to the motor. Remove those while holding the motor and transmission together. Carefully seperate them