...torque wrench to torque up to 176nm (130lb/ft), refit the spring clip (note which way it came off) and fit a cable tie to it to stop it falling off - if the holes in the nut for the spring clip don't ...
...other tools I use is a Twinmax carb ballancing tool to check the intake ballance. A good set of torque wrenches is recomened. The only really special tool I've found you need is a cluch hub ...
Question about 2000 Monster 750 - Dark - City - Dark city
...wrench would work here, but you'll need to torque it later anyway. Some kind of filter wrench - This will depend on your bike and the filter to be removed. (We'll look into the details later) A ...
side nuts, 116 lbs, sprocket retention nuts, 35 lbs, chain tensioner, 6 lbs, pinch bolts, 52 lbs. I have never used a torque wrench on anything on y bike, but I'm not racing it either. hope this helps
...wrench. crank the axle carrier until the tension matches the spec sticker on the swingarm re-torque the two bolts to the appropriate numbers,apply chain lube and ride. if i have to go into any more ...
Question about 2001 Monster 600 - Dark - City - Dark city
...torque wrench, The books shows you how to make the wrench but it doesn't give me the numbers. Check out desmotimes.com, I know they only deal with 4 cam engines, but the wrenches and specs might be ...
torque wrench to get everything back on and set safely for riding after the new tire is mounted. Good luck. -Mark Sorry for lack of "help" but this is a service worth paying for. It shouldn't take
Usually answered in minutes!
35 Questions
38 Questions
20 Questions
27 Questions
22 Questions
