Questions & Answers for: torque setting spark plugs

...specs; if you don't have a torque wrench, you want the spark plugs snug but not cranked down with all your strength. Replace the spark plug wire and this is important, don't mix what wire goes

...specs for 2003 toyota corolla Toyota do not have a specific torque setting for spark plugs in the master workshop manual,they say "hand tight, plus 1/8th turn"(using a plug socket and ratchet

spark plug torque setting Most aluminum heads have a spark plug torque of 14-15 ft-lbs.

spark plug torque settings What are the spark plug torque settings for this car the torque on the spark plugs for your 2005 Honda Civic. remember to use anti seize on the threads, screw them in by ...

spark plug torque settings Nobody torques spark plugs, just put anti-seize on the spark plug threads and hand tighten the spark plugs. Ignore the muppet who suggested anti-seize. 15 lb-ft according to

...torque. please help the spark plug tubes seals are part of the valve cover gasket most valve covers toque to 80-105 INCH pounds and ther spark plugs on a COLD head are 15-21 FOOT lbs HOT are 15 FOOT ...

torque setting for auto lite spark plugs going into a 2005 ford taurus My info says 11 ft lbs--motorcraft. That would probably work just fine for auto lite. I usually just snug-em up, no torque wrench

...tighten to the published torque spec using a torque wrench. Apply a dab of dielectric grease to the tip of the spark plug cable and reinstall the cable. If you don't have those tools, don't try

...torque setting for a 2010 jeep commander spark plugs In all the years I have worked or scooters bikes and cars, I have never torqued a spark plug. Tighten with fingers, put the wrench on and snug it ...

...torque Honda GX390 A common setting is 20 to 30 Nm, (15 to 20ft/lbs). First fit the spark plug with your fingers until tight. This is to make sure the screw thread lines up correctly. Then using a ...